[an error occurred while processing this directive]
Capcom Saturday Night Slam Masters

 

SATURDAY NIGHT SLAM MASTERS FLYER

PIN OUTS

JAMMA+ Connector

SOLDER SIDE PARTS SIDE
Ground A 1 Ground
Ground B 2 Ground
+5V C 3 +5V
+5V D 4 +5V
NC E 5 NC
+12V F 6 +12V
KEY H 7 KEY
NC J 8 Coin Meter 1
Lockout 2 K 9 Lockout 1
Speaker - L 10 Speaker +
NC M 11 NC
Video Green N 12 Video Red
Video Sync P 13 Video Blue
Service Switch R 14 Video Ground
NC S 15 Test Switch
Coin 2 T 16 Coin 1
2 Player start U 17 1 Player start
Player 2 Up V 18 Player 1 Up
Player 2 Down W 19 Player 1 Down
Player 2 Left X 20 Player 1 Left
Player 2 Right Y 21 Player 1 Right
Player 2 Button 1 Z 22 Player 1 Button 1
Player 2 Button 2 Aa 23 Player 1 Button 2
Player 2 Button 3 Ab 24 Player 1 Button 3
Player 4 Button 3 Ac 25 Player 3 Button 3
NC Ad 26 NC
Ground Ae 27 Ground
Ground Af 28 Ground


Plus Audio Phono Connectors (Left & Right) for Q Sound

Plus Player 3 & 4 connectors.


PIN OUT OF PLAYER 3 & 4 CONNECTORS CN4 & CN5

1 Ground
2 Ground
3 Right
4 Left
5 Down
6 Up
7 Push 1
8 Push 2
9 Coin Chute
10 Start

SWITCH SETTINGS


This board is equipped with an EEP-ROM, the settings can be changed via the on-screen test menu. Press the test switch to enter the menu.


IMPORTANT NOTE

When the EEP-ROM back up battery dies the board becomes inoperative. It must be returned to Capcom for re-initialisation. If you are in Europe this means sending it to Japan. Also if the board has been opened up or tampered with in anyway Capcom will NOT repair it.

OR

alternatively try this ;-)

[an error occurred while processing this directive]